%20(1)-500x500.jpeg "Erba Elan 30s")
-500x500.jpeg "Erba Elan 30s")
-500x500.jpeg "Erba Elan 30s")
Fully Automated ELISA Microstrip Processor
With the fully automated ELAN 30s, you have all the automation you need to achieve greater workflow efficiency.
Complete Solution for Your ELISA Workflow
Every laboratory is different. The ELAN 30s allows users to develop new, flexible analytical workflows by taking advantage of smart scheduling software. By combining up to 6 different assays in a single run users can break the traditional 2 or 4 plate mold and create ‘clinical panel’ based workflows. Multiple reporting formats enhance the final steps of the process and allow the user to report faster with more convenience.
DIMENSIONS
Length: 754 mm
Breadth: 520 mm
Height: 888 mm (dome open)
Weight: 65 kgs
Shipping weight: 95 kgs
POWER SUPPLY
Voltage: AC 110 - 240 V
Frequency: 50 hZ / 60 hZ
Power consumption: 300 W
GENERAL SPECIFICATIONS
Self-check at startup: Yes
Assays per batch: Up to 6 tests
Number of strips: 30 × 8 = 240 microwells
Sample tube size: 12-13 mm × 75 mm (5ml)
Reagent bottle: 24 × 20 ml
Controls & Calibrators: 30 × 1.5 ml
Location: 41 to 58 can be used for loading reagents in 5mL test tubes
Sample dilution: In test tubes
Tip capacity: 204 tips
READER SPECIFICATIONS
Dynamic range: 0.0 - 3.0 O.D
Wavelength range: 400 - 800 nm
Filter slots: 405 nm, 450 nm, 492 nm, 630 nm & 3 open positions
Reading mode: Single & Dual
Reading time: 20 sec per strip for single wavelength
Precision: < 1% C.V at 0.5 to 2.0 O.D
Accuracy: ± 1 or 2.5% (0.000 to 3.00) whichever is greater
WASHER SPECIFICATIONS
Manifold confi guration: 8 for aspiration & 8 for dispensing
Wash cycle: 1 to 9 (repeatable)
Residual volume: < 6 μL
Wash buffer capacity: 1 × 4L & 2 × 1L
DW Can: 1 X 20L
Low buffer alarm: Yes
Soak time: 20 to 60 sec
Dispense pressure: Pre-set
Rinse function: Yes
Waste Can: 1 × 20L
INCUBATOR SPECIFICATIONS
Temperature range: 37°C or R.T
Temperature accuracy: ± 1°C across plate @37°C
Shaker facility: Yes
Incubator time: Programmable
Time to reach temperature: < 5 min
Temperature monitoring: Yes
PIPETTING SPECIFICATIONS
Dispensing mode: Fixed needle or disposable tips
Sample tips range: 300 μL (5-200 μL)
Reagent tip range: 300 μL (10-200 μL)
Sample tip precision: < 3% CV at any operating volume above 10 μL
< 2% CV at 100 μL
Reagent tip precision:
< 1% CV at 100 μL
PROCESS SECURITY
Liquid level sensor:Yes
Level sensor system: Conductive
Clot detection: Yes
Tip detection: Yes
Alarms: Yes
SOFTWARE
Controlling software: ELAN 30s
Work protocols (assay): Unlimited
Data Processing: Quantitative & Qualitative
Levey-Jennings: Yes
Westgard rules:Yes
Process reporting: Event log + error log
Automatic error recovery: Yes
Password access control: Yes
CONSUMABLES
Probe clean solution : XL Wash
Carbonated disposable tips: Sample tips, Reagent tips
Create unlimited custom tabs and add any product detail, module, widget, design or HTML. Also possible to create custom tab layout using layout builder
Erba Elan 30s
- Product Code: Elan 30s
Fully Automated ELISA Microstrip Processor
With the fully automated ELAN 30s, you have all the automation you need to achieve greater workflow efficiency.
Complete Solution for Your ELISA Workflow
Every laboratory is different. The ELAN 30s allows users to develop new, flexible analytical workflows by taking advantage of smart scheduling software. By combining up to 6 different assays in a single run users can break the traditional 2 or 4 plate mold and create ‘clinical panel’ based workflows. Multiple reporting formats enhance the final steps of the process and allow the user to report faster with more convenience.
DIMENSIONS
Length: 754 mm
Breadth: 520 mm
Height: 888 mm (dome open)
Weight: 65 kgs
Shipping weight: 95 kgs
POWER SUPPLY
Voltage: AC 110 - 240 V
Frequency: 50 hZ / 60 hZ
Power consumption: 300 W
GENERAL SPECIFICATIONS
Self-check at startup: Yes
Assays per batch: Up to 6 tests
Number of strips: 30 × 8 = 240 microwells
Sample tube size: 12-13 mm × 75 mm (5ml)
Reagent bottle: 24 × 20 ml
Controls & Calibrators: 30 × 1.5 ml
Location: 41 to 58 can be used for loading reagents in 5mL test tubes
Sample dilution: In test tubes
Tip capacity: 204 tips
READER SPECIFICATIONS
Dynamic range: 0.0 - 3.0 O.D
Wavelength range: 400 - 800 nm
Filter slots: 405 nm, 450 nm, 492 nm, 630 nm & 3 open positions
Reading mode: Single & Dual
Reading time: 20 sec per strip for single wavelength
Precision: < 1% C.V at 0.5 to 2.0 O.D
Accuracy: ± 1 or 2.5% (0.000 to 3.00) whichever is greater
WASHER SPECIFICATIONS
Manifold confi guration: 8 for aspiration & 8 for dispensing
Wash cycle: 1 to 9 (repeatable)
Residual volume: < 6 μL
Wash buffer capacity: 1 × 4L & 2 × 1L
DW Can: 1 X 20L
Low buffer alarm: Yes
Soak time: 20 to 60 sec
Dispense pressure: Pre-set
Rinse function: Yes
Waste Can: 1 × 20L
INCUBATOR SPECIFICATIONS
Temperature range: 37°C or R.T
Temperature accuracy: ± 1°C across plate @37°C
Shaker facility: Yes
Incubator time: Programmable
Time to reach temperature: < 5 min
Temperature monitoring: Yes
PIPETTING SPECIFICATIONS
Dispensing mode: Fixed needle or disposable tips
Sample tips range: 300 μL (5-200 μL)
Reagent tip range: 300 μL (10-200 μL)
Sample tip precision: < 3% CV at any operating volume above 10 μL
< 2% CV at 100 μL
Reagent tip precision:
< 1% CV at 100 μL
PROCESS SECURITY
Liquid level sensor:Yes
Level sensor system: Conductive
Clot detection: Yes
Tip detection: Yes
Alarms: Yes
SOFTWARE
Controlling software: ELAN 30s
Work protocols (assay): Unlimited
Data Processing: Quantitative & Qualitative
Levey-Jennings: Yes
Westgard rules:Yes
Process reporting: Event log + error log
Automatic error recovery: Yes
Password access control: Yes
CONSUMABLES
Probe clean solution : XL Wash
Carbonated disposable tips: Sample tips, Reagent tips
- Brand: Erba
- Viewed: 1492
- Reward Points: 400
- Availability: In Stock
-70x70.jpeg)